5.1
Calibration
5.1
Calibrating the Measuring scales
The vertical measuring scale is supplied separate from the machine, the two horizontal
squaring arm scales are already attached to the machine but may not be positioned
accurately and will need calibrating.
Vertical scale: This measures the height of the board on the machine and is only used
for reference.
1. Take a small piece of board and accurately measure its' height, place the board in the
machine such that it lays over the groove where the scale is to be applied.
2. With a pencil, mark a fine line level with the top edge of the board adjacent to the
groove.
3. Remove the release paper from the groove in the Main Body and stick the Vertical
scale in place such that the pencil mark lines up with the measured dimension in (1).
1
2
3
