Evolution3 SmartFold User Guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 21 of 48
4.2 Adjust the blade depth and direction
To adjust the height of the blade, loosen knob ‘A’ by a half to
one full turn. Move knob ‘B’ up or down until the blade is long
enough to just cut through the material.
Place a piece of the material under the cutter bar so it does not
protrude past the edge of the cutter bar and the blade can be
seen against the edge of the material.
Tighten ‘A’ to lock the blade in chosen position.
The design of the Graphik blade allows it to be set in the blade
holder to cut in either direction. The cutting head can be used
with both blades cutting in the same direction or
in opposing direction.
