18
10. Annex I – EMC statement and guidelines
Guidance and manufacturer’s declaration – electromagnetic emissions
The Keeler K-LED II and chargers are intended for use in the electromagnetic environment specified below. The customer or user should assure
that they are used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
Single / double
charger only
RF emissions
CISPR 11
Group 1
The Keeler K-LED II chargers use RF energy only for their internal function.
Therefore, the RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The Keeler K-LED II chargers use RF energy only for their internal function.
Therefore, the RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
¹ Refer to section 1.1.4 of the Guide for the EMC Directive 2004/108/EC (published 21st May 2007).
The Keeler K-LED II is considered to be inherently EMC benign¹, and therefore is not covered by the statements in this section.
