Next
Home
Back
26
8. LED/bulb replacement
Caution:
Bulbs / LED’s can reach high temperatures in use – allow
to cool before handling
Use only genuine Keeler approved parts and accessories or
device safety and performance may be compromised
Disconnect the instrument from the electrical supply. Remove
the bulb / LED from the back of the instrument and insert the
replacement, ensuring that the bulb / LED key is aligned with
the aperture and securely pushed in.
After removal of the
bulb / LED do not touch the
bulb / LED contacts and
the patient simultaneously
All Pupil II LED
All PupiI II bulbs can be replaced with
an LED light source if required. Follow
fitting instructions as for bulbs, and as
shown below:
For further details see section 12.
