6
EN
KEELER K-LED II
5. FITTING THE K-LED II HEADLAMP TO YOUR LOUPE FRAME
1. To remove the loupes from the frame,
hold the loupe bar between your thumb
and forefinger of one hand and pull away
from the hinge held in your other hand.
2. Attach the LED light to the loupe bar.
Ensure that the LED light is fitted
correctly and held securely in position.
3. Re-attach the loupes and LED light to
the frame hinge by holding the loupe
bar as before. Locate the hinge pins into
the loupe bar holes and push the loupes
onto the hinge.
4. If the LED light is to be used without
loupes, attach the light to the adaptor
PD bar. Attach the cable to the frame
using the strap provided.
5. Connect the LED light lead into the
connector port on top of the battery
pack. To remove the lead pull in the
direction of the arrows on the connector
do not twist or unscrew.
