Using
Weightanka
2
‐
9
of
28
DWACLP010 Securing Pins (‘R’ clips)
‘R’ clip type securing pins used
to prevent accidental release of
the standard weights from the
Weight Locating Pins.
The securing pins are fitted after
all necessary standard weights
have been fitted ( See section
2.5 Page 11 )
Fit the securing pins into the
first visible hole of the weight
locating pin nearest to the top
standard weight
Weight of 4 securing pins =
0.15 kg.
4
pieces
DWATBAR10 Tommy
Bar
For use when tightening the
eyebolt into the pedestal
The length and diameter of the
tommy bar is specially designed
to apply the correct force when
tightening the eyebolt
The tommy bar should ONLY be
used with the eyebolt centrally
positioned and with one hand
turning each end.
NEVER use the tommy bar with
the eyebolt positioned at one
end as this would result in too
much force being applied which
could damage the eyebolt.
Weight of 1 tommy bar = 0.35
Kg.
