Kedr MIG 160GDM, User Manual

Page: 17 / 26

Fig. 4.
Fig. 4: Preset voltage display under MIG mode
c) Press the
【
Menu button
】
for the 1st time, the
【
Main display
】
shows the fine adjusting range
of preset welding voltage. Turn the
【
Data adjusting knob
】
to set the range from -20% to
+20% as Fig.5.
Fig. 5 Fine adjustment of preset range of voltage under MIG mode
d) Press the 【 Menu button 】 for the 2nd time, the 【 Main display 】 shows the fine adjusting
range of inductance. Turn the
【
Data adjusting knob
】
to set the range from -10% to +10%
as Fig.6.
Fig.6 Fine adjustment of inductance range under MIG mode
e) Press the switch of MIG gun. It starts wire inching. And the
【
Main display
】
shows as Fig. 7.
When connected w.ith MIG gun, press the torch switch for 5s without welding, the internal
wire spool in the machine starts to rotate and wire feeding at a high speed 11m/min for
20s.
. Then it stops automatically. When release the button in 20s, wire feeding stops
automatically.
15