Kedacom NVR2881-16016B/16HI, Installation Manual

Page: 10 / 16

8
2 Installing the Device
In a well ventilated area, install the device in a 19-inch rack as follows:
1. Insert the mother board and power module into respective slots on the rear panel until you
hear a click indicating that the board and module fit into the device cabinet completely.
By default, the device comes with only one power module.
To pull out the mother board:
1) Squeeze two plastic locks together on both sides.
2) Hold the locks and pull out the mother board.
To pull out the power module:
1) Push the plastic lock rightwards.
2) Hold the lock and pull the handle.