Alarm Management
35
5.2 Service
Alarm
Service alarm means alarms arising from change of the video source, such as motion detection
and video loss. And we take motion detection as an example.
Notice: video loss is detective all along, no special setting for it.
5.2.1
Motion detection
Motion detection refers that detect the motion of defined area, when the motion reached the
threshold, then trigger alarm.
5.2.2
Name the alarm
Click the rename button in the Service alarm interface, and name the alarm.
5.2.3
Alarm Linkage Settings
In the Service alarm interface, set alarm type to motion detection, and triggered by camera,
then set linkage time and schedule ;
Click Edit, set linkage policies, please refer to
5.1.3
section for details.
5.2.4
System Alarm
System alarm means alarms arising from exceptions of the NVR surveillance system, such as
disk error, IP conflict and network connectivity.
When an exception occurs to the NVR system, the following linkage handling setting method
is available: Menu entry:
Main Menu
Æ
Alarms
Æ
System Alarm
. The interface is as shown
in Figure 5-5.
