Kedacom IPC427-D020-N, User Manual

Page: 29 / 53

HD IR Dome Camera User Manual
25
The alarm signal comes from the alarms triggered in the set surveillance areas such as motion detection and
tampering or alarm input devices such as smoke detector.
Alarm linkage reaction includes Alarm Text Overlay, Snapshot or triggering alarm output device (such as alarm
bell). Explanations are as follows:
Acoustic Alarm: when an alarm is triggered, generate sound alarming (it requires the IP camera to connect
with an audio output device).
Report to Management System : when an alarm is triggered, report it to the VMS (it requires the VMS to
support this function).
Recording Linkage: when an alarm is triggered, start video recording automatically. Need to install a storage
card.
Text Overlay: when an alarm is triggered, display alarm text on the screen.
Snapshot: when an alarm is triggered, capture the image automatically. Need to install a storage card.
Alarm Output : it means linking to an alarm output device. It requires the camera to support alarm output
function and has connected with an alarm output device.
Email Notice: when an alarm is triggered, send an e-mail to the e-mail address automatically.
Notice: Go to Settings > Network > Other Protocols > SMTP to set the e-mail address. SMTP (Simple
Mail Transfer Protocol) is a group of rules for sending email from source address to target address and it
determines the transition method of email.
Picture 4-19 SMTP
4.3.1 Motion Detection
Detect movement features in the defined area. Once the movement exceeds the defined sensitivity, an alarm
will be triggered.
E-mail address for sending alarm email
User name and password of SMTP server
E-mail address for receiving alarm email