HD Intelligent Speed Dome Camera
User Manual
85
Picture 7-3 Arming durations
Set duration: configure arming durations according to actual requirements.
Click the blue bar to pop up a window for editing the accurate start time and end
time; click "
Save
" to validate setting.
Click any duration and there will be small white squares on the 2 ends of it. Put
the mouse on any whit square, left-click and drag the edit the start time and end
time.
Select the timeline of any day and delete the default blue bar. Left click on the
mouse and drag on the timeline from left to right to form a blue bar, above which
it shows the start time and end time.
Copy duration: click the copy icon
behind the timeline and copy the durations on
the day to one or several other days.
Delete duration: click "
Delete All
" above the timeline to delete all the durations.
Select any duration and click "
Delete
" on the popup window or above the timeline to
delete the duration.
Note: Select any duration with a mouse, and drag the blue bar on the timeline as a
whole without changing the length of recording duration.
8) Click "
Save
" to validate settings.
7.1.2
Video Blocked
When the preset area is blocked intentionally and affects normal surveillance of this area,
an alarm will be triggered. After receiving the alarm, user can find the cause of video
blocked quickly and recover the surveillance scene. Configuration steps are as follows:
1) Go to
Settings > Event > Intelligent Function > Video Blocked;
