Kedacom IPC121-Ei7N Series, User Manual

Page: 23 / 39

HD IP Camera User Manual
17
Picture 4-9 Guard area setting
[Notice]:
1. Guard areas can overlap with each other. The neighboring guard areas are better
overlapped to enable seamless surveillance and ensure continuous tracking;
2. The set guard area should be larger than the actual guard area to avoid target missing;
4.3.3 Shield Area Setting
Shield area is one or more polygon areas set in the surveillance image to mark areas where
uninterested objects are in. In some surveillance scenes, there are uninterested moving
objects inside of or on the edge of the guard areas such as trees and fountain. These
interferences can be removed by shield area setting.
As shown in the picture, there are some trees blowing in the guard area which are our
uninterested moving objects. In this case, we can set shield area to remove them.
Go to Intelligent> Intelligent> Guard Area .
Shield area setting:
1) Click “
Add
Shield Area” and draw shield area in the image as required;
2) After finishing drawing, click “
Save
”.