Keces P14, User Manual

Page: 14 / 29

Front Panel Operation
On-Off Button
Push once to turn on the P14. When the P14 is turned on the dim blue LED
indicator will become brighter and each channel indicators will illuminate.
Push the button again to turn off the P14. The front panel On-Off button will be
disabled when the Turn On Options switch is set to12 V.
The P14 protects itself from external conditions such as excessive heat and over
load. After you correct the fault, the P14 will resume operation. If the P14
remains in “protection mode” after it has cooled down and you’ve confirmed
there are no
external faults, it could indicate an internal problem. Please contact KECES’s
Technical Service Department.
Channel Indicators
When the four orange channel indicators are lit, please switch the DC output
voltage. When confirmed the DC output voltage, please press the Engage
button. When the blue channel indicators are lit, it means the DC voltage is
outputting. If the red channel indicators lit, it means OCP (Over Current
Protection).
OTP Indicator
It will glow red if any channel overheats. The On-Off button will also glow red if
the P14 overheats. If such a condition occurs you must provide for better
ventilation around the P14.
Problems and Remedies
Unit will not turn on
• Check the setting of the Turn On Options switch. (The front panel On-Off button
will be disabled if this switch is set to 12V).
• Check that the rear panel power switch is on and that the AC power is live.
Overheating
• Remove any nearby external sources of heat such other audio equipment or
heaters.
• Increase ventilation around the P14.