●
Options
●
Accessories
●
Transport Conditions
●
Disposal
●
Technical Data
●
CE Conformity, Directives and Standards
1.4.2
Not contained in this document
●
Mask description of the application
1.5
Documentation for further reading
Doc.No.
Description
Target group
-
-
-
1.6
Definition of terms
This user's manual corresponds to machinery directive 2006/42/EC. The terms
used in this manual that come from the machinery directive are the same as
in the preceding MD 98/37/EC.
Within standard EN 60204-1 the following term has changed:
EN 60204-1:1997
EN 60204-1:2006
Enabling device
Enabling control device (chapter 10.9)
In order to avoid ambiguity for users this manual still uses the term of
EN 60204-1:1997.
1.7
Information about MD 2006/42/EC
The machine directive (MD) 2006/42/EC will be valid from 2009-12-29 (without
any transition period). This means that all machines and safety components
that will be brought to market after this date have to confirm this new MD and
its harmonised standards.
For handheld terminals from KEBA this means that besides the new machine
directive also the standard EN ISO 13849-1:2008 will be used.
EN ISO 13849-1 demands for the safety relevant component "enabling switch"
the specification of category and Performance Level (PL) and for emergency
stop-buttons and grey stop-buttons the specification of the B
10d
-value.
These values can be found within the manuals in
and chapter Technical data, Enabling device.
Introduction
© KEBA 2009
User's Manual V1.50
13
Summary of Contents for KeTop T100
Page 1: ...KEMRO KeTop T50VGA User s Manual V1 50 Translation of the original instructions ...
Page 4: ......
Page 10: ......