The TM 240/A has been developed, manufactured, tested and documented in
accordance with the appropriate safety standards. Therefore, the products do
not pose any danger to the health of persons or a risk of damage to other
property or equipment under normal circumstances, provided that the instruc-
tions and safety precautions relating to the intended use are properly observed.
1.4
Notes on this document
This manual is integral part of the product. It is to be retained over the entire
life cycle of the product and should be forwarded to any subsequent owners
or users of the product.
1.5
Documentation for further reading
The following documents are to be observed depending on the system solution
used:
Doc.No.
Name
Target group
DE: 1000868
EN: 1000869
System manual Kemro automation
system
●
Project engineer
●
Electrician
●
Programmer
●
Commissioning foreman
●
Service technician
Introduction
TM 240/A, TE 220/A for KeStudio U3
© KEBA 2011
Project engineering manual V1.10
8
Summary of Contents for Kemro TM 220/A
Page 4: ......
