3.2
Accessories
3.2.1
TE 220/A terminal temperature sensor (optional)
The terminal temperature sensor TE 220/A is used for the external cold junction
compensation. It must be used when the temperature lines have intermediate
connections.
Fig.3-2:
View TE 220/A
The TE 220/A can be attached to the terminal in 2 different ways:
●
Via adhesives
●
Via cable binders
3.2.2
Connector strip
Input-/output signals: Standard male connectors with grid dimension 5.08 mm
The following female connectors can be used for the TM 240/A:
Female connector
Color
Order no. Weidmüller
2-pole
sw
BLZF 5.08/2 SN SW - 170769
4-pole
sw
BLZF 5.08/4 SN SW - 170771
6-pole
sw
BLZF 5.08/6 SN SW - 170773
8-pole
sw
BLZF 5.08/8 SN SW - 170775
Information
Larger terminal blocks may be used to group multiple signals. The current
carrying capacity of the terminal block is thus, however, reduced (according
to derating curve of the terminal block manufacturer.)
The appropriate female connectors are not included in the delivery of KEBA,
but can be purchased from KEBA.
The technical data for the terminals are contained in the technical data sheet
of the manufacturer of the female connectors.
For further information see System manual.
Description of the module
TM 240/A, TE 220/A for KeStudio U3
© KEBA 2011
Project engineering manual V1.10
12
Summary of Contents for Kemro TM 220/A
Page 4: ......
