background image

KeMes A1xx/ A2xx Brief description

Specifications are subject to change due to further technical developments.
Details presented may be subject to correction.

All rights reserved.

KEBA AG Head-
quarters:

Gewerbepark Urfahr, 4041 Linz, Austria, 
Phone: +43 732 7090-0, Fax: +43 732 7309-10, 
[email protected]

For information about our subsidiaries please look at www.keba.com.

V 1.05

Caution

This brief description does not replace the operating instructions!

You absolutely must observe all instructions in the operating instructions for use
and safety of the product!

Information

The current operating instructions are available in German, English, Spanish, Ital-
ian and French and can be downloaded directly from the KEBA website (http://
www.keba.com/kemes
). If you require the operating instructions in another lan-
guage, please contact KEBA.

Original language: German

Valid for firmware version 2.0 and later

Bluetooth declaration

The 

Bluetooth

®

 trademark and logos are registered trademarks of Bluetooth SIG,

Inc. and each use of this trademark by KEBA is licensed. Other trademarks and
brands are the property of their respective owners.

Information for the Canadian market

This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.

Summary of Contents for KeMes A1 Series













Reviews: