CP 503/A, CP 505/A,D,K, CP 507/
A,C
Mounting and installation instructions
Project engineering manual V1.06
35
© KEBA 2021
Fig. 5-20: Adding an expansion module
7) Secure the lock on the right side of the new added expansion module by
pushing it down.
Fig. 5-21: Securing the lock
8) Secure the end bracket on the mounting rail.
The expansion module is added.
5.7.4
Removing input/output modules
To remove input/output modules, proceed as follows:
1) Disconnect the power supply.
2) Remove the end bracket.
