7.1.4 Analog inputs
Connect not connected setpoint inputs to the analog ground to avoid setpoint changes !
Analog setpoint setting external
Analog setpoint setting internal
X2A
1 2 3 4 5 6 7 8 9
PE
0...±10 V DC
Ri = 55 k
+
X2A
1 2 3 4 5 6 7 8 9
R = 3...10 k
Figure 16: Analog inputs
7.1.5 Voltage input external power supply
When the power unit is switched off the control remains in operation by an external
voltage supply of the control board. To prevent undefined conditions at external power
supply, generally the supply unit and then the AIC unit should be switched on.
10 11
17 18 19 20
X2A
21 22 23
+
20…30 V ±0 % / 1 A DC smoothed
Figure 17: Voltage input external power supply
7.1.6 Digital outputs
10
18 19 20
X2A
21 22 23
max. 50 mA DC for both outputs
Figure 18: Digital outputs
51
CONNECTION OF THE CONTROL
Summary of Contents for COMBIVERT F5 Series
Page 2: ......
