Installation
©
2021 KEB America, Inc.
27
5.4.3 Flange-Mounted Brake with External Hub
Figure 13 Installation Components
Figure 14 Installed Brake
Number
Description
1
Shaft
2
Mounting Surface
3
Magnet
4
Key
5
Socket-Head Screws (ISO 4762)
6
Armature with External Hub
7
Set Screw
1.
Align the magnet (3) to the mounting surface (2) such that the magnet is centered over
the shaft.
→
See Brake Centering for details.
2.
Fix the magnet (3) to the mounting surface (2) with socket-head screws (5).
3.
Mount the armature/hub assembly (6) over the shaft (1) and slide toward the magnet
until the armature and magnet are separated by an air gap of width X (shim washers
can be used between hub and shaft shoulder).
→
See Adjusting the Air Gap for details.
4.
Secure the armature assembly (6) in place using a set screw or shaft bolt and washer
end plate as shown on the next page.
