12
HARDWARE
3.3 Terminal assignment
The adapter is supplied with power via the serial interface. Input voltage 5...12 V (16 V max).
Pin Designation
=> KEB
control
board
Properties
Specification
1 FLASH-TERMINAL In
Programming mode
(not for customers)
Reserved
(not wired)
2 TxD
Out
Transmission signal
Not wired
3 RxD
In
Receive signal
Not wired
4 RxD-A
In
Receive signal negative RS485 half and
full duplex
5 RxD-B
In
Receive signal positive
6 5V_DIAG_TERMI-
NAL
Power
Voltage supply
@ F5 Lift opera-
tor / S6/F6 control
board: 5 V ±20 %
7 0V_TERMINAL
Power
Reference potential
RS232 [RS485]
Reference potential
Voltage supply
Reference poten-
tial
8 TxD-A
Out
Transmission signal
negative
RS485 half and
full duplex
9 TxD-B
Out
Transmission signal
positive
Table 3:
Terminal assignment
3.4 Start-up
The Bluetooth-Adapter is visible to the user via the apps and can be paired with them.
After Bluetooth pairing has been carried out with the pairing code shown on the Blue-
tooth-Adapter, the Bluetooth-Adapter is ready for operation.
After successful connection to the KEB drive controller, the user can access the follow-
ing functions, among others:
• COMBIVIS mobile app supports the KEB drive controllers COMBIVERT S6 and
COMBIVERT F6
• KEB Elevator App supports the KEB drive controllers COMBIVERT F5 with Lift Op-
erator
• Dashboard for monitoring of current status values of the drive
• View of the parameter list and parameter values
• Creating and sending backups of the parameter list
• Contact to the KEB Service