background image

     

keatingofchicago.com

CLEANING THE UTENSILS

Spatulas

 should be hand washed 

in mild to medium strength deter-
gent and towel dried. 

NOTE:

 Avoid contact with Chlorine 

or bleach, it will discolor the 
steel spatula. Rubbing the spat-
ula with vegetable oil will slow 
discoloration.

Rinse 

scraper

 and carefully 

wipe blade with a dry cloth. 
Cover blade with plastic protec-
tion cover when not in use.

Rinse Palmetto brush until 
clean.

NOTE: BECAUSE OF THE SUPERIOR MIRACLEAN® 
SURFACE, THE ONLY TOOLS YOU WILL EVER NEED 
TO CLEAN THE GRIDDLE ARE A NATURAL BRISTLE 
BRUSH AND A KEATING SCRAPER.

 

 

NEVER USE A GRIDDLE STONE, BRICK OR SCREEN 

TO CLEAN THE MIRACLEAN® SURFACE.

  

 

DAMAGE DONE TO THE MIRACLEAN® SURFACE BY 

GRIDDLE STONE, BRICK OR SCREEN WILL VOID THE 
WARRANTY.

 

 

THE DAMAGE DONE TO THE MIRACLEAN® SURFACE 

IS IRREPARABLE.

 

NEVER USE ICE TO COOL THE MIRACLEAN® 

SURFACE. USE OF ICE MAY WARP THE MIRACLEAN® 
PLATE.

 

 

USE ONLY KEATING SUPPLIED CLEANING TOOLS 

AND KLENZER.

 

USE ONLY KEATING SPATULAS.

 

DO NOT WASH STEEL SPATULA WITH CHLORINE OR 

BLEACH AS IT WILL DISCOLOR.

NOTE: 

Keating Klenzer MSDS is available on our 

website.

SHUTDOWN

1. For 208 - 240 Volt Unit: Turn each thermostat fully 
counterclockwise and On/Off switch to “OFF” position.

For 480 Volt Unit: Turn thermostat knob to “OFF” 
position.

MAINTENANCE

WARRANTY REPAIRS

Keating’s warranty begins with the date of installation. 
In the event that your MIRACLEAN® Electric Griddle, 
under warranty, needs repairs other than routine 
maintenance or cleaning, you are required to contact 
Keating of Chicago (at 1-800-KEATING) before calling a 
local service company.

PREVENTIVE MAINTENANCE

Preventive maintenance should be done in daily, week-
ly, monthly and yearly intervals as necessary. Following 
preventive maintenance procedures will help keep your 
MIRACLEAN® working effi ciently. Proper care and servic-
ing will lead to years of quality performance.

TIME FRAME

OPERATOR/OWNER

AT LEAST 

DAILY*

• Check lights and controls.

• Clean griddle surface.

• Drain and clean grease drawer.

• Completely wipe down griddle
   cabinet.

AT LEAST 

MONTHLY*

• Check condition of Miraclean® 
   surface and review proper 
   cooking procedures.

• Check calibration of 
   thermostat(s).

• Review operating instructions
   received with Miraclean® griddle.

TIME FRAME

QUALIFIED SERVICE PERSONNEL

AT LEAST 

YEARLY*

• Have Miraclean® Griddle 
   completely checked, calibrated, 
   tested, cleaned, etc. by qualifi ed 
   service personnel.

*

High production facilities should be checked more often.

Contact the factory or a local service company to perform 

maintenance and repairs.

A. Griddle Surface

With proper care, the MIRACLEAN® surface and its 
unique cooking properties will last for many years. 
However, nicks or dents in the griddle surface may 
cause the griddle surface to lift from the depressed 
area. If nicks are close together, the surface may raise 
and be torn when a spatula or scraper is used. Care 
should be taken, as the damage done is irreparable. 
See Figure 3-3. 

6

HAMBURGER 
SPATULA

GRIDDLE
SCRAPER

Summary of Contents for pre 2000 series























Reviews: