Keas MOV1, User Manual

Page: 13 / 16

11
About Bluetooth
Some Bluetooth devices can start music automatically as soon as the device is connected. "Bluetooth device" means every smartphone, tablet or Laptop PC
that has at least the same function as below.
a) The product should be mounted with Bluetooth wireless technique, Bluetooth ver.4.0 AptX
b) It should have a function to play music file such as MP3.
c) In some old version of notebook and computer with Bluetooth function, the sound may neither be played nor be recognized through Bluetooth speaker
even after it recognizes the speaker according to the driver module software of built-in Bluetooth or the hardware version.
Except, when the sound does not come out after it is recognized in the computer through play devices like speaker or headphone, etc, please check if the
selection of play device in the [SOUND] item on control panel has been set as [Basic Communication Device]. If the device cannot play even its setting has
been completed, please inquire the manufacturer of notebook or computer.
Q&A
Q. Cannot turn on the power.
A. The built-in battery of the product should be fully charged. After recharging the battery, please try again. Or please check if there is any damage on the plug
of power cable, the connector of adapter, and the recharging port of main body.
Q. Cannot recharge.
A. Please check if there is any damage on the plug of power cable. Please check if the connector of adapter and the recharging port of main body have been
normally connected.
Q. Cannot hear the sound or very low volume.
A. Please check if Bluetooth device has been well connected and started normally. Also, please check if the volumes of Bluetooth device and product have
been set to the proper level.
Q. Cannot reconnect the device automatically once it has been connected.
A. Please register and connect from the beginning after deleting the information on the list registered in the device. It is because in some cases, the access
information of Bluetooth device may be deleted.
Q. Wonder in what case the automatic connection does not work.
A. Once the device has been paired, it will find the last paired host (smartphone) device to the surrounding and progress the pairing automatically when the
speaker is maneuvering. Except, if the pairing stops not because of the cut off by the power switch of speaker, but it was because of Bluetooth function OFF
of host (smartphone) or power OFF, the automatic pairing will not be done. At this time you may repeat the process of 'Stage 3, Bluetooth Connection' in the
guide manual.
This wireless equipment has a possibility of mixing electric waves and cannot provide the services on life and safety.