EZ-INSTALL WIZARD
Name –
Select this dropdown to display Wi-
Fi networks within range. If a network does
not appear, it may be on the other frequency
(2.4GHz or 5GHz).
Use hidden SSID –
Use this option to specify
the SSID of a hidden Wi-Fi network.
Pass –
This is the password field for the Wi-Fi
network found previously. Input the password
for the Wi-Fi network.
Set as Priority –
This is an advanced
option and usually not required. This option
allows network traffic to be delivered to the
Wi-Fi interface first. Enable this only at the
instruction of an IT representative.
Save Changes –
to complete the Wireless
Bridge / Uplink connection, you must select
save changes.
The
Next Step
button can be selected if
Stand
Alone (No Internet)
was selected previously.
❹
Cont’d
Note:
The wireless radio (2.4GHz or 5GHz) selected
for the Wireless Bridge will
no longer
be able to be
used as an Access Point for the KE2-EM Lite. If you
lose access to the KE2-EM Lite and cannot reconnect,
perform a Factory Reset and select the other wireless
radio for the Wireless Bridge.
