21
Charge /discha rge And Disch arge /ch arge Syc le Of Nicd/n imh Battery
NiMH CYCLE
DCHG>CHG 3
DEC
INC
DEC
INC
Batt Type
Stop
Start
Enter
‘>3 seconds’
D>C 022:45 00890
Number
of cells
Elapsed
time
Battery
voltage
Discharged
capacity
Discharge
current
NiMH 1.0A 7.42V
DCHG 1 1314mAh
CHG 1 1430mAh
You can set up sequence on the left and the number of cycles on
the right. You can balance, refresh and break-in the battery with
this function. You can set a temporary cool-off procedure in the
user’s setting. Range of the cycle number is 1-5.
Press BATT TYPE/STOP key to stop program,you can press
START/ENTER key to alter charge current. The sound indicates
the end of program
When it approaches to the end, you can see the capacity of the
battery being charged or discharged. You can press INC or DEC
key to display result of each cycle.
Pb (lead-sulphuric acid battery program)
This program is only suitable for charging Pb (lead-acid) battery with nominal voltage from 2 to
20V. Pb (lead-acid) battery is completely different from NiCd/NiMH battery. These batteries can
only deliver current lower in comparison to their capacity. The same restriction applies to the
charging process. Consequently, the optimum charge current can only be 1/10 of the capacity.
Pb battery can not be used for fast-charging,please follow the instructions provided by the
battery manufacturer.
You can press START/ENTER key to make it blink and alter the value of parameters using INC or
DEC key, press START/ENTER key to stare the value.
CHARGE/D ISCH ARGE AND DISCH ARGE/C HARGE SYCLE OF NiCd/NiM H BATTERY
