-9-
How to use
Power On
Standby Mode
After powering on, the unit displays the Standby Mode which allows users to access to other modes.
Please see the following instruction for the standby mode below.
Display
Course
：
Current course number.
Course Name
：
Course name for current course number.
Firing Temperature
：
Maximum temperature in the program.
Firing Time
：
Total programmed firing time.
Current Temperature
：
Current muffle temperature.
Function Key
F1 (Program)
：
Go to program mode.
→
P10
F2 (Copy)
：
Go to copy mode.
→
P14
F3 (Default Set)
：
Go to default mode.
→
P14
F4 (Maintenance)
：
Go to maintenance mode.
→
P15
Up & Down Key
：
Change course. Fast forward by holding the key longer.
Left & Right Key
：
Invalid
START STOP Key
：
Start firing and go to firing mode.
→
P12
(Up) Key
：
Key used to move the table up.
(Down) Key
：
Key used to move the table down.
Caution) When muffle temperature is high, for safety purpose, table moving down is limited as below.
・
When muffle temperature is 900℃ and over, the unit keeps the table at the highest position (0).
・
When muffle temperature is 550℃
～
900℃, the unit can move down the table to position (3).
・
When muffle temperature is under 550℃, the unit can move down the table until lowest position (5).
