TV (
Seg)
Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, press
f
a little long (less than one second).
Disclaimer notes are displayed.
Use
j
to check the disclaimer notes, use
j
to select
OK
, and then press
c
(
選択
[Select]).
The initial setting screen for using the au Media Tuner is
displayed.
Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
Use
j
to select
オート設定（�送�）
（�送�）
(Auto
(Broadcasting wave)) and then press
c
(
選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
Select
マニュアル設定
(Manual) to set the channel
manually.
You need to press
f
a little longer than other keys
(less than one second) so that the au Media Tuner
would not start carelessly. When you press
f
for
one second or more longer, the Blind Screen is set/
released.
➡
•
➡
•
•
Watching TV (1Seg)
When the standby screen is displayed, press
f
a little long (less than one second).
To Change Channels
Use
s
to change channels.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
Channels cannot be changed with
s
when the data
operation screen is displayed.
■
•
•
EZ Channel-Plus/EZ Channel
1ch
2ch
…
12ch
TV (1Seg)
Change channels one by one.
Program 16
Program 2
Program 1
…
EZ Channel-Plus/EZ Channel
1ch
2ch
…
12ch
TV (1Seg)
Change channels one by one.
Program 16
Program 2
Program 1
…
