41
In Case of Loss of
Y
our NS02
In Case of Loss of Your NS02
The Remote Auto Lock allows you to remotely activate the
Auto Lock, and Address Book Lock, preventing others from
using your cell phone.
Setting Conditions for Activating
the Remote Auto Lock
You can activate the Remote Auto Lock by calling your
NS02 a set number of times from a registered phone
number within a specified period of time.
When the standby screen is displayed, press
c
.
Use
a
to select
Settings
and then press
c
(Select).
Use
j
to select
Privacy Setup
and then press
c
(Select).
Use
j
to select
Security Lock
and then press
c
(Select).
Use
j
to select
Remote Auto Lock
and then
press
c
(Select).
Enter Lock No., and then press
c
(OK).
Use
j
to select
Caller ID List
and then press
c
(Select).
Press
c
(Edit).
Enter a phone number, and then press
c
(Reg).
➡
➡
➡
➡
➡
➡
➡
➡
Press
&
(Back).
Use
j
to select
Specified Time
and then press
c
(Select).
Enter a time and then press
c
(OK).
This sets the time limit for receiving the set number of
calls after the first call is received.
You can set a time from one to ten minutes.
Use
j
to select
Incoming Call Count
and then
press
c
(Select).
Enter a number of calls, and then press
c
(OK).
This sets the number of calls to receive to activate the
Remote Auto Lock.
You can set a number of calls from three to ten.
Use
j
to select
ON/OFF Setup
and then press
c
(Select).
Use
j
to select
ON
and then press
c
(OK).
Remotely Activating the Remote
Auto Lock on Your NS02
Call the NS02 from the registered phone number
repeatedly within the set time limit.
When the specified number of calls are received, the
Remote Auto Lock is activated and a message plays
telling you that the cell phone is locked.
➡
➡
➡
•
•
➡
➡
•
•
➡
➡
•
