19
Making and
Ans
w
er
ing C
alls
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press
c
.
Use
➡
u
/
d
/
l
/
r
to select
Set Functions
and then press
c
(Select).
Use
➡
u
/
d
to select
Tone/Vib/Lamp
and then
press
c
(Select).
Use
➡
u
/
d
to select
Incoming Setup
and then
press
c
(Select).
Use
➡
u
/
d
to select
Incoming Call
and then
press
c
(Select).
Use
➡
u
/
d
to select
Volume
and then press
c
(Select).
Use
➡
u
/
d
to adjust the volume and then
press
c
(OK).
Each press of
•
u
/
d
changes the volume one
step.
STEP UP
The ring tone volume gradually increases.
5 (Deka)
(loud)
扌
1
(soft)
The ring tone sounds at the set volume.
OFF
The ring tone does not sound.
Turning On the Answer Memo
When the standby screen is displayed, hold down
C
for at least one second.
is displayed on the standby screen.
■
Turning Off the Answer Memo
When the standby screen is displayed, hold down
C
for
at least one second. The answer memo is turned off and
disappears from the standby screen.
The cell phone can record a maximum of ten
•
messages, each up to 60 seconds long.
Answer memo is a function that automatically answers
•
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
■
Playing a Message
If a message is recorded,
AnswerMemo
appears on
the standby screen.
Use
➡
u
/
d
to select
AnswerMemo
and then
press
c
(Check).
Use
➡
u
/
d
to select
Play Memo
and then
press
c
(Select).
Use
➡
u
/
d
to select the message you want
to play and then press
c
(Play).
To stop playing the message, press
•
c
(Stop).
