K-10-BL
K-10-BR
H-12
H-12
H-8
Be sure that the
Prop Connector
goes below the
Back Rails.
4
K-31-B
H-5
Be sure that the Props
are on the inside of the
Back Rails.
5
Be sure that the
Prop Connector
is below the
Back Rails.
Attach the Left and Right Back Legs
to the outside of the Back Rails
using the 3-1/4” Cevis Pins (H-12).
Do not put on the Hair Pins at this time.
6
Place the Seat Rails (B-37-S) onto
the 3-1/4” Clevis Pins and secure
with Hair Pins (H-5).
7
Attach the Back Rails (K-31-B) to
the outside of the Prop Assembly
using 2-1/4” Clevis Pins (H-8).
Let the Prop Assembly swing
down so that the Prop Connector
can go below the Back Rails.
Please double-check your work at
this time. Any error in this
assembly will cause serious
problems later.
B-37-S
Make sure that the cut-away part
of the Back Legs face in so that
they will support the Back Rails.
B-37-S
Now put the
Hair Pins on the
3-1/4” Clevis Pins.
H-8