kd frames Charleston Plus Queen Assembly Instructions Download Page 3

Page: 3 / 4

Use 2-1/2” Bolts (H-21) and

Cross Dowels (H-3) to attach

Bed Rails (A-80) to the Headboard

and Footboard. The pockets in the

Bed Rails should be facing in and

open to the top of the Rails.

Leave all bolts loose until

everything is attached. Then

tighten all bolts.

H-21

H-3

NOTE:

Place the best looking rail

on the outside to make

your frame look its best.

NOTE:

Rail pockets must

face the inside.

Insert Connector Slats (A-28-C) into the

pockets that have holes. Secure using

2 - 1/2” Bolts (H-21) and Cross Dowels

(H-3). Leave these loose at this time.

H-3

H-21

Summary of Contents for Charleston Plus Queen

Page 1: ...gs WOOD SCREWS GO IN THESE POCKET HOLES Use a phillips screw driver to attach the Legs to the Bed End using 4 1 1 2 Wood Screws Black H 20 1 RAIL POCKETS MUST ALL BE ON THE SAME SIDE A 15L A 15R THESE...

Page 2: ...ACK VIEW Push the 6 Headboard Pickets A 22 and the 3 Headboard Pickets A 22 P into holes on the Headboard Bottom A 56 HB The 3 pickets in the middle A 22 P should be the ones with pocket holes see bac...

Page 3: ...the Rails Leave all bolts loose until everything is attached Then tighten all bolts H 21 H 3 NOTE Place the best looking rail on the outside to make your frame look its best NOTE Rail pockets must fac...

Page 4: ...y green tint in the wood will change to light brown in a few weeks This will happen in 20 to 30 minutes if placed in direct sunlight Tulip Poplar can be left unfinished clear finished stained or paint...