Secure in place using the wheel
washer first (
13
) and then the
split pin (
14
).
Insert the split pin into the holes
shown and split the two sides of
the pin where it exits. Repeat for
other wheel.
Step 4
Place the leg brace (
4
) onto the
back side of the legs.
Line up the holes and fasten in
place using two 25mm (
12
)
nuts and bolts.
Step 5
Secure the bottom side of the
tray brackets (
9
) to the legs
using two 75mm (
11
) nuts and
bolts.
Place the front bracket plate (
8
)
along with the other ends of the
tray brackets to the plastic base
and secure together using two
25mm (
12
) nuts and bolts.
Step 6
3.
