USE EXTERNAL POWER
Please use output DC 3V 300mA regulating external direct current power, check the polarity.
BASIC OPERATIONS
1. Press FM /Power On button (4) to receive the FM band program. Switch between FM and FM1 by
pressing the button (7) .
2. Press AM/Power On button (6) to receive AM band program. Under AM mode, move the Band
selector (14) to select among MW, and SW1-7.
3. Turn the Volume Control (19) to adjust the volume.
4. Turn the Tuning Knob (5) to search for the required station.
5. The Tuning indicator (11) will light up , when you receive the correct station and the station signal is
sufficiently strong.
6. You may turn on the night light by pressing the button (9).
7. You can enjoy stereo FM reception when earphone is plug-in (20). The Stereo Indicator (10) will
light up.
8. Press button (3) to turn off the radio.
9. Use the support rack when necessary.
ANTENNA
1.
The radio receives MW by using the internal magnetic antenna. You can get the best reception by
rotating the direction of the radio.
2.
When you receive FM station, please pull out the telescopic antenna to get the best reception by
changing its length and angle.
3.
When you receive SW station, please pull out the telescopic antenna and keep it vertical to get
better reception.
4.
You can improve the FM and SW reception through the wiring antenna.
TIME SET
1.
After installing batteries, under the clock mode, the “12:00” appears on LCD.
2.
Keep the Time Set button (15) pressed, meanwhile press the Hour adjustment button (13) to adjust
hour, (12) to adjust minute.
3.
Under the radio mode, long press the AL Set button (15) to see the time.
4.
The 12 hours system is used for the radio.
