Base Station v4 Product Guide
Page |
8
3
2B
INSTALLATION AND SETUP
3.1
14B
Installation Procedures
To install the Base Station, simply connect the provided power cable to the Base
Station and plug into an appropriate power source.
When the Base Station uses cellular or DHCP Ethernet connectivity to the cloud, it
will connect automatically to the cloud and begin operating normally.
When connected to an Ethernet network requiring a static IP address or when
connecting to WIFI additional configuration will be required. In these situations,
work with the KCF Technical Product Center (TPC) to ensure proper configuration of
the applicable network settings.
This product shall be securely mounted via:
a)
a Universal Mount (KCF Part Number SD-MNT)
b)
standing with antennas pointed up
and
retained with a safety strap through
the handle and a fixed location to prevent drops (wire cable, safety wire, etc.)
This product must be serviced and installed by instructed persons only.
This product is intended for use in a restricted access area only.
SD-MNT Details Shown
