Securing the multi corer
21
After the sample has been taken and you hoist
the multi corer, it is very important to mount the
safety clamp before doing any job on the
sampler.
The photo shows an old model with 2 safety
clamps.
Securing and ejecting the
sample
22
For emptying the sample tube, you must hold a
thin plate at the end of the tube to keep the
sample while removing the tube.
23
The sample ejection aggregate is optional.
1.
The sample tube is placed on the piston
(D)
2.
Tighten the handle (C) to fasten the tube.
3.
Turn the handle (E) and remove the
desired height of sample.
4.
To lower the piston at its start position,
you must lift the pawl, (F) and turn the
handle backwards.
