12
Trouble
Possibilities
Cheek up
Solutions
Remarks
Compressor
does not
work
Power is off
The fuse is broken
The connection between
plug and socket is not
good
The circuit of input and
output is out of use
Check the fuse
Check the socket
Make sure that the
power is on
Replace the fuse
Repair or replace
the socket
Check the circuit with
electric instrument
If it is necessary
please contact
after-sales service
for repair
Compressor
Keeps on
working
The thermostat knob is not in the
proper position
The temperature
Frost on the evaporator
inside is too
is too thick
high
The door is being
opened too frequently
Too much food has
been stored at once
The temperature
The ambient tempera-
Inside is OK
ture is too high .while
the thermostat indicates
a small number
The thermostat does
not work
Check the
thermostat
Check whether
the frost is thicker
than 6-8mm
Make sure whether
the knob is
indicating at the
“5-6”(or deeper)
Rotate the thermostat
to the proper position
Defrost regularly
Reduce the times
of opening
Take out some of
The food
Adjust the
thermostat knob
Replace the
thermostat
Ask for profes-
sional help
The themostat
Knob on”2-4”is
Better(or proper)
Ask for after-sales
service
Too noisy
The floor is not level
Make sure that the
Freezer is level
Put pad under the
castors
The screw in fan or condenser is loose
The refrigerating circuits touch catch other
The screw is loose
Rotate the fixed
screw
Separate them
5.Do not put combustible ,explosive or volatile dangerous articles, heavily corrosive acid or alkali of liquid in glassware into
the freezer.
6.Children should be kept away from the freezer to avoid damage to the inner container or any accidents being incured.
7.If the power cable damages, for avoid dangerous, must by manufactory or its maintain a set or similar profession job the
personnel replaces.
FREEZING METHODS
1.Do not put too much food into the freezer or exceed the loading line.
2.proper space should be allowed between foods to ensure cooling air circulation.
3.Never use corrosive detergent, hot water, or washing power to clean the freezer.
4.Do not use water to scour the freezer. Do not use hard brushes or wire brushes to clean the freezer.
5.Do not use metal or sharp tools for defrosting.
6.Do not use electric heaters to heat up and defrost.
7.The green lamp is a power indicating lamp. When the power is on, the lamp will be on.
TROUBLE SHOOTING:
The design and production comply with the relative security standard of China. If you find it does not work as usual, plesae
examine and handle it according to the following table first. If the situation does not improve, you must contact our after-sale
service center or our special repair division to examine and repair the appliance.
The following problems are not causes of breakdown:
Problems
There is a sound of liquid flowing in the freezer
Too noisy
The refrigerating system does not work for a
long time but the inside temperature is very
low.
Causes and resolutions
It is the sound of refrigerant flowing in the circulating
pipeline of the refrigerating system. It is normal.
The freezer is not installed in a level ground.
Change the position.
It is an indicator of high quality for its
good insulation and low cooling retention.
It is normal.
999
Seite
999
Seite
11
