◆
Install the headlight & front fender
Assembly Instructions
8
The headlight and front fender are both secured by a single bolt, so the front fender must be installed together with the headlight. If you prefer
not to have a front fender, you may install the headlight by itself.
Loosen the bolt on the fork brace. Align the bolt holes of both your front fender together with the hole on the fork brace, then reinsert
the bolt through all holes and tighten the bolt.
Pull one end of the fender brace until the loop at the end is centered in the bracket, reinsert the bolt through the loop at the end of the
brace, and tighten completely with a 4mm hex wrench and a 8mm bolt extractor holding the nut. Repeat on the other side.
Step 1:
Step 2:
Summary of Contents for Tornado Step-Thru
Page 1: ...Owner s Manual www kbobike com Tornado Step Thru...
Page 2: ......
Page 24: ...www kbobike com...
