background image

2.3 Signal words

DANGER

• Death or serious injury is imminent.

WARNING

• Death or serious injury is possible.

CAUTION

• Moderate or minor injury is possible.

2.4 Definitions

STUDIO OPERATOR

People who provide devices to users on a commer-
cial basis. The studio operator is trained to operate 
and maintain the device. She/he is responsible for 
the proper operation of the device.

USER

A person who uses the device. 

STAFF

People who are responsible for the operation, clean-
ing and disinfection and instruction of the user on 
how to operate the devices.

QUALIFIED, TRAINED AND AUTHORIZED SER-
VICE TECHNICIAN

Qualified staff who have been trained and authorized  
by the manufacturer for assembly and repair work 
with specific device.

2.5 Transport 

WARNING

Overturning load

Danger of being crushed by heavy parts 
of the equipment. 

Wear safety shoes.

To lift the device at least two persons are needed.

2.6 Environmental regulations  

Some areas of the USA and Canada have specific 
regulations regarding disposal of waste. Please 
check the laws in your area and act in accordance 
with municipal waste regulations. Please contact 
your code enforcement officials for more information 
regarding laws governing disposal in your area.

2.7 Service

REPAIRS - SERVICE - REPLACEMENT - PARTS - 
OPERATING AND ASSEMBLY INSTRUCTIONS
If you are in need of any of the above mentioned 
products or services, you should contact:
 
Laundries unlimited of Indiana, Inc.
dba Tanning Supplies unlimited.
1504 Sadlier Circle South Drive;
Indianapolis; IN 46239, U.S.A.
1-877-307-8434 (toll free) or 317-217-1700

O p e r a t i n g   I n s t r u c t i o n s

 

|

 KBL 

 

7

Summary of Contents for vibraNano beautyShaper





























Reviews: