KBL Tower space 2000, Operating Instructions Manual

Page: 5 / 56

O p e r a t i n g I n s t r u c t i o n s | KBL tower space 2000
5
1.1 About these instructions
This operating manual is intended for use by
• operating staff,
• users,
• service staff.
Any person dealing with this KBL Sunlamp Product
(hereafter referred to as tanning device) must have
read and understood these instructions.
This manual describes tanning devices equipped
with the maximum number of features.
Keep this manual ready to hand at all times.
1.2 Safety signs
This symbol indicates that general haz-
ards exist for the human health.
This symbol indicates that due to elec-
trical tensions hazards exist to the
human health.
This symbol indicates that due to UV
radiation hazards exist to the human
health.
This symbol indicates that due to fall-
ing loads hazards exist to the human
health.
This symbol indicates the danger of
pinching.
When closing and opening panels and
covers, you can pinch your hands.
This symbol indicates the danger of
burns from hot lamps and housing parts.
If the tanning device was operated
before being switched off and opened,
lamps and housing parts may be hot.
This symbol indicates that damages
may occur at the tanning device, at the
material or at the environment.
This symbol indicates the type BF
applied part.
IMPORTANT INFORMATION
This symbol does not identify safety
notices, but states information for a bet-
ter understanding.
1.3 Transport by forklift truck
The box with the tanning device components is
mounted on a pallet.
• Insert the forks carefully into the openings of the
pallet.
• Lift the load by a few centimetres.
• Transport the load carefully to the place of
installation.
1. General information