O p e r a t i n g I n s t r u c t i o n s
|
megaSun space 3000 & hurricane & Thunder Hybrid
8
Duties of the operator
The manufacturer cannot be held liable for dam-
ages or injuries resulting from improper use of the
equipment or non-observance of these operating
instructions.
Only use spare parts approved by KBL, otherwise
operating authorization and terms of guarantee will
become invalid. Only replace tubes and high pres-
sure lamps with those listed on the tanning device.
Otherwise, this voids the operating authorization and
warranty!
General safety advice
• Follow all instructions given in this manual. In addi-
tion, observe all relevant statutory provisions and
regulations, also those applicable in the country of
operation.
• The tanning device may only be installed and set
up by trained and authorised personnel having
received safety-related instruction.
• Arbitrary modifications or conversions of the equip-
ment are not permissible.
• Observe all danger signs and safety notices
attached to the equipment.
• Safety notices must not be removed, and safety
equipment must not be disabled or removed.
• The tanning device must only be operated when in
perfect working condition.
• Never operate the tanning device with the outer
covers or acrylic panes removed.
• Absolutely observe the maintenance frequencies
indicated in the maintenance plan.
Timer operation
The tanning device must be controlled via an external
timer that meets the requirements of EN 60335-2-27,
cl. 22.105. Should the external timer fail, an internal
timer will switch off the tanning device automatically
after 33 minutes.
Tanning times
Adhering to tanning times and schedules is essential.
