A s s e m b l y I n s t r u c t i o n s
|
7000
α
/8000
α
touch
36
5.8 Install bed pane
PH2
Remove protective film on the bottom!
• The film on the top stays on until after
aquaCool initialisation.
5.8.1 INSTALL BED PANE
• The installation of the bed pane is similar to the
disassembling steps (4.4).
5.8.2 INSTALL DUCTING PANE
• The installation of the ducting pane is similar to the
disassembling step (4.3.6).
Remove all protective film!
Center-align the ducting pane so that
the bed pane can move freely.
5.8.3 CLOSE THE BED PANE.
5.8.4 RE-INSTALL THE CANOPY PANE.
• Install the canopy pane > similar to disassembling
step 4.3.4.
• Connect interior control panel -> similar to disas-
sembling step 4.3.2.
• Clean inside of canopy pane.
5.9 Attach canopy end caps
PH2
5.9.1 OPEN CANOPY PANE
5.9.2 FASTEN CANOPY END CAPS
• Unpack both canopy end caps
D
(left/right) from
the box.
• Connect decorative lighting
Ⓐ
and slide the can-
opy end caps
D
onto the guides.
Ⓐ
D
• Screw on front fastener of the canopy end cap
(M6x12 - PH2).
PH2
5.9.3 CLOSE THE CANOPY PANE
Summary of Contents for MegaSun 7000a
