Page
42
Tilt down the side pane.
㉜
Loosen the hexagon socket head screw
(SW10) by approx. two turns.
㉝
Remove the hinge cap.
㉞
PH2
Page
42
Tilt the canopy pane down.
㉞
Remove the front fastening of the end cap of
the canopy (Phillips screw).
㉟
Remove the end cap
of the canopy and
pay attention to the
cable of the decora-
tive lighting
㊱
.
㉟
㊱
㊱
Disconnect the cable connection of the
decorative lighting on the inside of the
canopy end cap.
REPLACING THE SPRING-LOADED WIRE ROPES
㊲
㊵
㊳
㊴
19
13
㊲
Involve a second person to secure the canopy
against falling down.
㊳
Remember the position of the nut at the
spring tensioner. Then slacken the spring
using a pipe wrench SW19.
㊴
Undo the upper rope holder SW13.
⇒
Replace the wire rope. Fix and tension it.
㊵
Grease the rope in the area of the return pulley
with copper crease or adhesive lubricant
HHS-2000.
U t i l i s a t i o n e t M a i n t e n a n c e
|
megaSun 7900
α
lpha
50
