KBL megaSun 6700 a business, Assembly Instructions & Menu Settings

Page: 39 / 68

A s s e m b l y I n s t r u c t i o n s | 6700
α
/6800
α
/7000
α/
7900
α
39
• Connect the audio cables.
5.13 Attach left shoulder piece
PH2
• The left shoulder piece is installed similar to the
right shoulder piece.
5.14 Fine adjustment of the
bed lock
5
Attention
The bed and the bed pane can be dam-
aged when it is opened incorrectly.
• Open the tanning device only with the
bed pane in position (closed)!
Adjust the bed lock so that
• the bed closes and stops with gentle pressure.
• the bed moves freely the entire distance and does
not touch other components.
The bed dampers must be centered in
the openings.
Adjustment options:
• Right/left offset – to be done via the front plate.
Grab hold of the top of the plate and using physical
strength carefully jerk it in the required direction to
move it sideways.
• Height offset – can be adjusted by adjusting screws
on the side (ISK spanner SW 5).
5
5.15 Install side plates
PH2
On both sides (left/right):
• Pull of protective film.