17
Operation and Service megaSun 4500
3.5. Removing the burners
The burners may be installed or removed by trained expert staff
only.
Figure 3-9 Pushing the burner
towards the side
Figure 3-10 Pulling the burner
out towards the front
Dirt accumulation and incorrect positioning may result in dama-
ge to lamps and sockets when the system is running. Therefore,
on inserting the burners, you must ensure that the contact sur-
faces of both sockets and burners are clean. Insert the burners
straight into their sockets.After being inserted into the socket,
the little metal shackle in the centre of the re
fl
ector should face
the re
fl
ector.
Installing the bur-
ners
Abb. 3 11 Burner KBL 3230 355 00
Step
Procedure
Reference
1
Remove the canopy pane and the
fi
lter pane frame.
Section 3.2
and 3.3
2
Hold the burners with a soft cloth, then push them to one
side and pull them out towards the front.
Fig. 3-9 and
Fig. 3-10
3
You must not touch the burner glass with your bare hands.
If necessary, clean the bulb with an alcohol-containing clea-
ning agent..
