WESII User Manual
Manual-WESII-Rev1205A
Copyright © KBC Networks 2012
Page 34 of 48
www.kbcnetworks.com
Modulation Types
:
BPSK= Binary Phase-Shift Keying
QPSK= Quadrature Phase-Shift Keying
QAM= Quadrature Amplitude Modulation
Coding Rate
: Useful proportion of the data-stream
GI
: Guard Interval
Channel-Frequency:
The frequency used can be selected automatically by the
Host/AP based on the Country Code selection and spectrum width. The frequency
can also be selected manually by clicking “Select”. The following is an example of
available frequencies based on US availability (it will open in a new window):
Note:
On EMEA firmware versions, if the unit is not set to ‘Auto’ and radar (DFS) is
detected on the selected channel the link will be disconnected and the unit will not
automatically search for another channel to operate on.
Client Frequency Selection:
The Client obtains its frequency from its connected
Host/AP. To ensure that a particular Client connects to a certain Host/AP, filter using
the SSID function as discussed in section 3.2.5 above.
Interference Analyzer:
If “Interference Analyzer” is selected first, a frequency site
survey will be performed in order to determine the appropriate static frequency to
select. The Interference Analyzer is only found on the Host/AP unit and only
available if a channel width of 20/40GHz is selected.
Note:
Surveys to detect interference should only be conducted when directly
