QSG-THLK_Series-Rev2004
Copyright © KBC Networks Ltd. 2020
www.kbcnetworks.com
Page
10
of
12
Note:
the DHCP Server is enabled and the IP range will change to reflect LAN IP address used.
12.
The unit will function after about 1 minute.
13.
Log back into the system with either the same IP or the IP you changed it to (if you
forgot the IP address, open a comman
d prompt and type ‘ipconfig’.
The IP address
should be the gateway address shown if DHCP on the LAN interface is still enabled).
14.
Click on ‘NETWORK
-
>Interfaces’ and confirm it looks similar to the following image:
15.
Click on
‘NETWORK
-
>Encryption tunnel’ menu on the left.
16.
Click the ‘Enabled’
checkbox at the top
and select ‘Client’ to the right of it.
17.
Leave the default ‘Preshared key’ (PSKPSKPSK) for this setup.
Note:
Please remember to change the preshared key value when implementing this system
within a LIVE environment to something more complicated. Any ASCII character is supported
except the space character (all units must have the same key).