background image

 

WES Mesh Wireless System Operations Manual 

 

PREFACE 

 
 
PART NUMBER CONFIGURATOR 

 

MESH - 

…

 

…

 - 

…

 X 

 

MESH Product 

Series 

 

…

 

Primary Radio Indicator (A= 400 mW; B= 900 MHz) 

 

…

 

Secondary Radio Indicator (A= 400 mW; blank= single radio option) 

 

…

 

Chassis style (O= Outdoor; I= Indoor) 

 

Power Supply plug type (A= US; B= UK; C= Europe) 

 

KBC MESH PART NUMBERS  
This operations manual covers the following part numbers: 

 

DESCRIPTION 

     KBC 

PART 

NUMBER 

Standard dual radio node 

kit: 

   MESH-AA-Ox 

Standard single radio node kit: 

 

 

 

MESH-A-Ox 

900 MHz, dual radio node kit: 

 

 

 

MESH-BA-Ox 

900 MHZ single radio node kit: 

 

 

 

MESH-B-Ox 

 

Accessories: 

 

13/15 dBi high gain patch dual band antenna; 2.4 / 5 GHz: 

PAT5824 

13/15 dBi high gain omni-directional dual band 2.4 / 5 GHz:  OD524-15 
28 dBi parabolic grid dish antenna; 5 GHz:   

 

GD5W-28 

19 dBi parabolic grid dish antenna; 2.4 GHz : 

 

GD-24 

Directional 900 MHz Yagi antenna:   

 

 

Y9 

5 dBi omni-directional dual band antenna; 2.4 / 5 GHz* 

OD524-5 

5 dBi omni-directional 900 MHz antenna**   

 

OD9-5 

Mid-span compliant power injector module†  

 

PIM 

1000 mA 12 VDC non-regulated power supply† 

 

PS 

 

* Two included in all MESH-AA-Ox and one in all MESH-A-Ox & MESH-BA-Ox kits 
** One included in all MESH-BA-Ox and MESH-B-Ox kits 
† One included in all WES mesh series kits 

 

PRODUCTS INCLUDED IN KITS 
All mesh node kits include the following: 
Qty 1:  Mesh node (all part numbers; particular type determined by part number) 
Qty 2:  OD524-15 (MESH-AA-Ox); All other part numbers (except MESH-B-Ox): Qty 1 
Qty 1:  OD9-5 (MESH-BA-Ox & MESH-B-Ox only); All other part numbers: N/A 
Qty 1:  PIM 

Qty 1:  PS 

Qty 1:  Pole mount kit 

Qty 1:   LAN port weatherproof strain relief assembly kit 

Qty 1:  Operations manual 

 

 
 
P-1 

 

WES Mesh Wireless System Operations Manual 

 

PREFACE (CONTINUED) 

 
TECHNICAL SUPPORT AVAILABILITY 
This manual is comprehensive to the extent that it will answer many of your technical 
questions. Our toll free technical assistance is available should you require additional 
assistance. KBC offers technical support over the phone or by way of e-mail to all KBC 
qualified integrators on the WES Mesh products. Our technical support hotline is 
available during regular US west coast business hours, Monday through Friday on all 
non-major holiday business days. KBC will follow up on all electronic inquiries before 
the end of the following business day.  
 
NORTH AMERICA  
888-366-4276: Monday – Friday 10am-8pm Eastern (7am-5pm Pacific) 

[email protected]

: 24hr availability, response time varies 

 
HAWAII & ALASKA / GUAM, PR & OTHER US TERRITORIES 
949-297-4930: Monday – Friday 7am-5pm Pacific Time 

[email protected]

: 24hr availability, response time varies 

Note: the toll free 800# does not work from Alaska 
 
CENTRAL / SOUTH AMERICA 

[email protected]

: 24hr availability, response time varies 

 
ASIA 

[email protected]

: 24hr availability, response time varies 

 
SOUTH PACIFIC / PACIFIC ISLANDS 

[email protected]

: 24hr availability, response time varies 

 
EUROPE 
+44(0)1622 418782: Monday – Friday 9am-5pm UK Time 

[email protected]

: 24hr availability, response time varies 

 
AFRICA 

[email protected]

: 24hr availability, response time varies 

 
Technical Support is offered in English, however, KBC has worldwide representatives 
who can provide technical support in many local languages. 
 
 
Please note: technical assistance is available after having read through this manual. 
Comprehension of terms and topics will assist in trouble-shoot procedures. 
 
 
 

 

 

 

 

 

 
 
P-2 

Summary of Contents for MESH




















Reviews: