Configuring the ESUL8P-PC2-D*
1.
Connect the DIN rail or wall-mount
brackets as required.
2.
Connect a 48Vdc power supply, (supplied
separately).
3.
If using only one power source, connect
pin 1 to pin 5 and pin 2 to pin 6 otherwise
the Power Fail LED will be lit.
4.
Install SFP modules as required.
5.
Link external devices to the switch with
appropriate cables.
6.
Connect the fault alarm contact if required.
LED
Status
Description
PWR1
ON
Power is supplied to the unit
OFF
No power to the unit
PWR2
ON
Power is supplied to the unit
OFF
No power to the unit
P-Fail
ON
Power to PWR1 or PWR2 has failed
OFF
Power is functioning to both or
none of the power inputs.
PoE 1-8
ON
The port is supplying power to the
powered device.
OFF
There is no powered device
attached or the power to the device
has failed
Ethernet RJ45 Port P1 – P8 Status LED
Each RJ45 Ethernet port has two indicators. The yellow
lamp indicates port speed, and the green lamp indicates
port link state.
Lower
OFF
Full duplex link
FLASH Collisions are occurring
ON
Half duplex link or no connection
Upper
OFF
Effective network connection has
been established for the port
FLASH Data traffic is passing through the
port
ON
No effective network connection
has been established for the port
Ethernet RJ45 Ports P9 & P10 Status LED
Each RJ45 Ethernet port has two green indicators.
The yellow lamp indicates port speed, and the green
lamp indicates port link state.
Lower
LED
ON
Power is supplied to the
unit
OFF
Port not operating at
1000M or no connection
Upper
LED
ON
Effective network
connection has been
established for the port
FLASH
Data traffic is passing
through the port
OFF
No effective network
connection has been
established for the port
Link/Active
ON
SFP port link
established
FLASH
Active data flow
OFF
No connection to the
network
Need Help/Troubleshooting?
Visit our website
http://www.kbcnetworks.com
or
contact your nearest KBC office or dealer:
APAC:
Phone: +65 98463323
Email:
EMEA:
Phone: +44(0)1622 618787
Email:
USA:
Phone:
+1 949-297-4930
Toll Free: +1 888-366-4276
Email:
Quick Start Guide
ESUL8P-PC2-D*
Industrial Ethernet Switch
ESUL8P-PC2-D* LED Status Indicators
QSG_ESUL8P-PC2-D-Rev1112
www.kbcnetworks.com
Copyright © KBC Networks Ltd. 2011
