eCopper™
QSG-EERF1-LN1-R-MN-B_Series-Rev2101
www.kbcnetworks.com
Copyright © KBC Networks 2021
Quick Start Guide
EERF1-LN1-R-MN-B
EoU Receiver
–
1 UTP Connector and 1 RJ45
Introduction
The KBC EERF1-LN1-R-MN-B series is an Ethernet over UTP (EoU) receiver with
1 UTP port supplying Power over Wire (PoW) and 1*10/100M Ethernet port.
This receiver provides connectivity for 1* PoW/PoE (EERF1-LS1-T-MN-B)
transmitter. Power is supplied to the transmitter through the UTP cable.
Varying data rates are supported depending on cable distance and quality.
Plug-and-play design ensures ease of installation with no electrical adjustment
needed. LED indicators are provided to show the operational status of the
unit.
This unit is available in compact wall-mount via metal clip.
Features
•
1 UTP port with PoW
•
1 *10/100M Ethernet port
•
Connect one transmitter or EERF1-LS1-T-MN-B
•
UTP data rate >40Mbps (300m)
•
Based on cable quality, cable pairs used (1,2 or 4 pairs) and voltage
applied to cable (48~57VDC) from headend, PoE and PoE+ are supported
by PoW up to 400m.
•
Over current and short circuit protection
•
Unique PoW transmission protection design so that no power is output
when transmitter end is not connected.
Downloads
Full specifications, features and additional information can be found on the
KBC website:
