Kaysun ONNIX KAY-D 26 DR8, Owner'S Manual

Page: 9 / 20

◄ Page 9 ►
While the unit is on, use the SWING/DIRECT
button on remote control to set the direction
(vertical angle) of airflow. Please refer to the
Remote Control Manual for details
When using COOL or DRY mode, do not set
louver at too vertical an angle for long periods
of time. This can cause water to condense on
the louver blade, which will drop on your floor or
furnishings.
When using COOL or HEAT mode, setting the
louver at too vertical an angle can reduce the
performance of the unit due to restricted air flow.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set
manually. Grip the deflector rod (See Fig.B)and
manually adjust it to your preferred direction.
For some units, the horizontal angle of the
airflow can be set by remote control. please
refer to the Remote Control Manual.
CAUTION
Do not put your fingers in or near the blower
and suction side of the unit. The high-speed
fan inside the unit may cause injury..
Fig A
Fig B
Deflector rod
Unit Specifications
and Features
Caution: Do not keep louver at too vertical
an angle for long periods of time. This
can cause water condensation to drip on
your furnishings.
Setting Angle of Air Flow
Setting vertical angle of air flow
NOTE ON LOUVER ANGLES
A
A
B
A
A
B
rank